Dimensional HDU Sign with Gold Leaf

January 27th, 2014 by Dan Marquis

Dimensional HDU sign with gold leaf

Sign is fabricated from 2″ thick High Density Urethane with v-carved logo and applied letters with prismatic carving and gold leaf

This sign is six feet wide and is fabricated from High Density Urethane (HDU). The logo is v-carved and finished with 23k gold leaf. The letters are carved with a prismatic face from 1″ thick HDU and finished with 23k gold leaf. Gold leaf is best used on letters and graphics with an angular surface, as shown here, because it shows off the light that reflects off those angled surfaces.

The name panels on the bottom panel are fabricated from 1/8″ DiBond composite panels and lettered with vinyl, making them easy to change when needed. the panels are attached with brass screws to match with the gold leaf, as well as to prevent rusting.

This sign is six feet wide and is fabricated from High Density Urethane (HDU). The loge is v-carved and finished with 23k gold leaf. The letters are carved with a prismatic face from 1" thick HDU and finished with 23k gold leaf. Gold leaf is best used on letters and graphics with an angular surface, as shown here, because it shows off the light that reflects off it. The name panels on the bottom panel are fabricated from 1/8" DiBond composite panels and lettered with vinyl, making them easy to change when needed. the panels are attached with brass screws to match with the gold leaf, as well as to prevent rusting. The posts are pressure treated 4 x 4s with white PVC sleeves and capped with copper finials.

The letters are carved with a prismatic face from 1″ thick HDU and finished with 23k gold leaf, and applied to the surface of the sign

Comments are closed.